西藏甲玛超大型斑岩成矿系统找矿方向

甲玛矿床位于西藏冈底斯成矿带，其勘查和研究程度均较高，矿体由斑岩型矿体、矽卡岩型矿体、角岩型矿体及外围独立金矿体组成，具有多元矿体结构，其成矿元素为Cu、Mo、Pb、Zn、Au和Ag，呈现多金属成矿作用特征。矿区深部及外围的勘查找矿方向一直是地质学者们关注的热点。在斑岩成矿系统理论的指导下，近年来在甲玛矿区深部及外围取得了重大找矿突破。基于最新勘查成果，甲玛矿床共探获铜资源储量超过850×10⁴ t，钼资源量达91×10⁴ t，铅锌资源量超过150×10⁴ t，伴生金储量为220 t，伴生银储量超过1×10⁴ t，达到超大型矿床规模。为进一步指导区域及外围勘查找矿工作，以甲玛矿区最新勘查成果为基础，通过对矿区钻孔的详细编录，采用地表构造蚀变填图等方法，系统解剖了甲玛矿区不同矿段的矿体地质结构，并揭示了其矿床地质特征。结合甲玛矿区新发现的主矿段深部的厚大矽卡岩矿体和外围则古朗北矿段的巨厚斑岩型矿体，分析了矿区深部及外围找矿潜力，认为甲玛矿区深部仍存在厚大矽卡岩铜钼矿体和斑岩钼矿体，应进一步加强对外围则古朗北矿段新发现的斑岩矿体、矽卡岩矿体和角岩型矿体的勘查，建立新的资源储备。此外，归纳总结有效勘查找矿方法，以期为深入探究甲玛矿床成矿作用和创建综合勘查找矿模型提供参考依据，并通过系统梳理矿区已有勘查和研究资料，总结甲玛矿床的找矿标志，为区域类似矿床的地质勘查提供重要线索，也为青藏高原斑岩成矿系统的勘查和研究工作奠定坚实基础。     

Performance study of constant temperature water immersion thawing system using refrigerator compressor casing heat

Five commonly used thawing methods include water immersion (WT), lotic water (LT), ambient temperature (AT), refrigerator (RT), and microwave (MT) thawing. WT, LT, and AT cannot maintain a specified constant temperature during thawing, whereas MT consumes substantial energy. On the basis of the shortcomings of the above methods, a constant temperature water immersion thawing system using fixed-frequency refrigerator compressor casing heat storage (CWT-CCTS) is designed. The CWT-CCTS recycles the waste heat of the compressor casing and uses the heat to thaw frozen food in constant temperature water. The new system not only provides a new heat source for thawing but also reduces the overall energy consumption and noise of the system during operation. Under a stable full-load operating condition of the refrigerator, CWT-CCTS can reduce the compressor casing and discharge temperatures by 3.8°C and 2.5°C, respectively. The water loss rate of CWT-CCTS is only 15.9% of MT, demonstrating a decrease of 84.1%. In terms of thawing, the maximum power consumption saved by the device is 516.79 kW·h per year in comparison with MT, and the cost of the device can be recovered after 178 days of use     

1,2,4-trichlorobenzene decomposition using non-thermal plasma technology

Non-thermal plasma(NTP)is regarded as a potential application for environmental pollution control due to its ability to remove pollutants.As a major precursor of dioxins,the influence of the parameters of 1,2,4-trichlorobenzene(TCB)decomposition using NTP technology was investigated through a series of experiments,including voltage,frequency,water content,initial concentration,flow rate,and oxygen content.The experimental results show that the energy injected into the NTP system has a positive correlation to voltage and frequency.Oxygen has the greatest influence on TCB decomposition.The optimal reaction condition was at 15 kV,1000 Hz,an initial concentration of 20 mg m^?3,a flow rate of 2 l min^?1,H2O at 4%,and O2 at 0%.Under this condition,the TCB removal efficiency could reach 92%.According to the generated product backstepping,the hydroxyl radical(·OH)plays an important role in TCB decomposition due to its strong oxidation,which participates in the dechlorination and oxidation reactions as free radicals,and the possible decomposition pathway of TCB by NTP is inferred from the identified byproducts.It is of great significance to investigate the influence of the parameters of TCB decomposition using NTP technology in order to provide references for industrial application.     

Dietary fibre extracted from different types of whole grains and beans: a comparative study

Dietary fibre (DF) from different whole grains and beans (quinoa, buckwheat, highland barley, pea and mung bean) was extracted by enzymatic action. The components, crystallinity and properties were comparatively studied. Furthermore, we evaluated correlations between DF components and their crystallinity, thermal, physicochemical and functional properties. Results showed quinoa DF had highest polyphenol (25.58 mg GAE per 100 g), pectin (4.68%) and cellulose (52.34%) contents, crystallinity value (CV, 30.24%), ΔH (185.53 J g⁻¹), water-holding capacity (WHC, 5.35 g g⁻¹), α-amylase activity inhibition ratio (α-AAIR, 13.34%) and glucose absorption capacity (GAC), but lowest protein content (9.78%) and T_p (163.05 °C). Mung bean DF had highest lignin content (33.56%), fat adsorption capacity (4.73 g g⁻¹), and T_p (176.25 °C), but lowest CV (15.26%) and ΔH (132.15 J g⁻¹). Correlation analysis showed cellulose content had positive linear correlations with CV, ΔH, WHC, α-AAIR and GAC, but a negative correlation with T_p. The structure and properties of DF are largely attributed to cellulose content.     

难进入地区钻探工程航空运输技术经济分析

论述了难进入地区钻探工程航空飞行运输方式,对直升机吊运的技术经济性进行了研究,认为在地质调查钻探施工作业中应用航空运输的客观条件已基本具备;航空器在钻探工程中的应用必将促进钻探装备技术的发展,标志着地质调查钻探作业水平进入了一个新的高度。     

HN150型高效碾混机主体机构的应用研究

本文对HN150型高效混碾机进行了应用研究,通过对其主体的重新设计和局部改进来提高其性能,从而达到提高工作效率、降低运行费用的目的。     

青海省纳日贡玛斑岩铜钼矿成矿物源分析

纳日贡玛铜钼矿是青海南部发现的一个最重要的斑岩型铜钼矿床。从流体包裹体,硫同位素,成矿流体来源和作为"示踪剂"的稀土元素等方面分析了该矿床的成矿物质来源。认为:硫是由岩浆硫(为主)和成矿流体萃取围岩中的硫所组成的一种混合硫源;成矿流体属岩浆水和大气水的混合流体;稀土元素分析表明,成矿元素Cu、Mo可能主要源于花岗斑岩。     

KT178 型取心钻具在共和干热岩钻井中的应用

青海共和盆地干热岩资源富集于花岗岩地层,硬度高,研磨性强,部分层段裂隙发育,取心困难。针对干热岩地层和取心需求特点,研制了一套KT178型取心钻具,并配套设计了孕镶金刚石取心钻头。该钻具为单动双管取心钻具,可配套井底动力钻具使用,设计中注重对钻具外管、卡簧等关键部件的强度校核。在GH-01井和GH-02井中,经过两轮试验和优化,钻具逐渐成熟,获取了较完整的岩心样本,满足干热岩勘探取心要求,具备了向页岩气、水资源勘察等具有间断取心需求的同类工程推广应用的条件。